manual
SPECS |
TYPE S |
TYPE A |
flex to fit tube diameters... |
1.00” - 1.25" |
1.50” or larger |
wall thickness |
0.20” |
0.20” |
length |
1.60” |
1.60” |
weight |
20g |
28g |
If you are unsure about the diameter of your top tube, it is strongly recommended that you measure its width with a ruler or measuring tape in order to make the appropriate selection.
DISCLAIMER: Skout Frame Shields fit securely only around circular tubing. They do not fit properly around oval or aero shaped tubing.
HOW TO USE SKOUT
Step 1. Locate area on top tube where handlebars impact by allowing handlebars to gently touch top tube.
Step 2. Install Skout by spreading its two ends apart enough to clear over top tube and place over impact area with SKOUT logo facing upward.
Step 3. Recheck placement to ensure handlebars touch only the Skout Frame Shield and not the bike frame. Make adjustments and center if necessary.
Step 4. Ride your bike with zero worries of damaging your top tube from handlebar impact and remember to always ride safe.
QUESTIONS?
support@skoutvelo.com